Cara Memasang Hdloader Ps2 Mmc

1. Cara Memasang Hdloader Ps2 Mmc Games

Untuk file BOOT.ELF bisa anda ganti dengan BOOT.ELF (boot hdloader) kreasi anda sendiri,kemudian copy folder tersebut kedalam flashdisk. Selanjutnya pasang flasdisk di slot usb ps2 lalu pasang mcboot ulaunch di slot mmc1,untuk yang belum punya bisa bikin dulu caranya bisa anda lihat disini. Keunggulan dari chip ini adalah mampu membooting OPL dari HARDISK PS2, jadi proses Booting-nya sudah tidak membutuhkan MMC lagi. Contoh dari Chip Modbo 5.0 seperti di bawah ini: Untuk anda seorang Teknisi mungkin tidak akan kesulitan untuk memasang chip tersebut, karna cara memasangnya sama seperti kita memasang Chip modbo yang lainnya.

Here is a nice and easy to use pre-compiled set of tools for the PC that can used to install Free Mc Boot v1.8c. All one would need is a PS2 to PS3 MC adapter model number CECHZM1 only will work as of this moment.

Cara Memasang Hdloader Ps2 Mmc Games

I don't expect the dev to add support for third party adapters but they are under $10 shipped. I have added easy to use bat files so no CMD prompt knowledge is needed. All you need to do is install the drivers for the MC adapter for use on your PC, I will provide the Windows drivers below I have tested them on Windows Xp x86 and Windows 7 x64 both worked without a hitch.1 Install Drivers for adapter, Windows drivers can be found2 Insert PS2 MC into device and plug into your PC via USB port and wait for it to be recognized.3 Run FORMAT.BAT from the Free Mc Boot v1.8c pack found (warning this will format the entire card backup your saves before doing so.

Either using the CECHZM1 to the PC or to another PS2 MC for the time being)4 After it formats the PS2 memory card successfully, then double click the INSTALL.BAT and wait. It will install the mod for you with all needed applications5 Insert into ANY PS2 and enjoy your newly modded memory card, it will have HDLoader, SMS Media Server, ESR, and uLaunch pre-installedNow I will say I have had it fail a time of two and had to restart the process but it doesn't take long and always works in the end. Only card I have ever had fail was a 128mb card that was some el cheapo rip off.

All Magic Gate cards seem to have just about a 100% success rate for installs so an official card is suggested but not required. If it fusses up simply format and then re-install and you will get there in the end.Thanks goes out the the devs behind this from the start, jimmikaelkael, Neme and special Thanks to all involved in many tests:Bootlegninja, JNABK, TnA, dlanor, g.t.o, psychomantis, tar, krika69,AdvanS3B, katananja, Janaboy (all the tester team and everyone I forget).

It's not called anything with 'bank'. It's DEV.1 and DEV.2. ('modes')NEITHER of both modes modes store the ELFs on the chip! Only DMS4-PRO and CC with a bigger Flash-Memory supported ELFs on there.The correct paths and names are these:DEV.1 = mc0:/BOOT/BOOT.ELFDEV.2 = hdd0:/boot/boot.elfNOTHING ELSE WILL WORK, because the filenames and if they are written in caps or not DOES MATTER and I've seen, that the wrong name has been given to you before!As for DEV.2. You need to install an ELF there, using the 'MI-DEV.2-Installer' if you had NEVER activated DEV.2 on your PS2. It should only be necessary for the very first time and later you can manually replace the installed ELF!Since your laser seems to be about to 'die', you might try FMCB/FHDB as well!1.953 is still working quite well with the MI and Clones!